A pivot door, popularly called a pivoting door, uses pivot points in the floor and ceiling. This causes it to rotate around its own vertical axis in both directions. These interior doors are both stylish and sleek, making them completely at home in modern interiors.
Need virtually invisible pivot doors? Then Adooré’s pivoting doors are the best choice for you. Scroll on if you want to know more about these.
A pivoting door is a type of interior door that uses special, strong hinges mounted in the door surface. Because these doors rotate around their vertical axis, you can open them from either side.
The most modern variants feature virtually invisible hinges incorporated into the door. These doors provide a minimalist, stylish look as sills and other visually distracting elements do not apply.
Do you have a large passageway or a space you pass by a lot? This is where a pivot door is a great idea. You can easily push and leave them open.
Adooré’s pivot has the look of the X-frame model. The door pivots to either side, eliminating the need for a latch or handle. There are several finishing options, allowing you to have the pivot door made completely to your liking.
Adooré’s pivot has the look of the X-frame model. The door pivots to either side, eliminating the need for a latch or handle. There are several finishing options, allowing you to have the pivot door made completely to your liking.
Many finishes are available for pivoting doors. You can choose between different materials and colors, one of which is sure to be perfect for your interior.
With pivoting doors, you have little to consider about the weight of the door. This is because the hinges are enormously sturdy and thus can support a lot of weight. This also makes it possible to use large glass sections finished with steel or aluminum as pivoting doors.
You choose the door’s pivot point. You can open the pivoting door like a swing door, but in two directions, if you place the pivoting hinges along the side.
Furthermore, you also choose the desired format. At Peeters Interieur, every door is 100% custom made.
A pivot door with glass feels completely at home in a modern interior because of its large glass areas and clean finish. In other interiors, a pivoting door is a real addition if you choose the right material with the correct finish.
Many different finishes and materials are available because just about any door leaf can be used as a pivoting door. So in a rural interior, you could choose a door leaf made of wood and in a modern interior one with a black finish made of aluminum or steel.
For steel and aluminum, all RAL colors are an option. If you prefer a different material, it’s best to stop by our showroom in Meerhout for advice on your specific situation.
From measurement to installation, the average delivery time is +/- 8 working weeks. Please note that in many cases our schedule is full more than 8 weeks in advance, so don’t wait until the last minute to order your doors and make sure you are on the schedule in time. Measurement can always be scheduled at a later time. Also be sure to come in early for info and/or a quote as the choice of your doors may affect other factors in your build such as the plaster, screed/floor (expansion joints and floor transitions), baseboards, etc.
When you order your interior doors from us, we always provide an on-site measurement to ensure that all measurements are correct. However, in order to receive an accurate quote, it may be helpful to already take your own measurements (approximate). The more info, the more concrete and correct your quote.
It is best to install the doors as late as possible in the construction/construction phase. After the doors are installed, all that follows is the installation of baseboards and painting. Especially with painted doors, it is best to install the doors as late as possible. The less chance of damage if one still has to pass with large elements or other work to be done. In addition, it is also very important that the moisture level in your building is no longer too high and that heating is already provided. The minimum temperature in the residence should be +/- 14°. This is to prevent moisture problems and warping of the door leaves.
Interior doors themselves can be replaced relatively easily. Still, there are many elements to consider when replacing interior doors:
For example, if you want to install doors in your newly built home for the time being for budgetary reasons, don’t work on the baseboards yet and don’t paint yet or just prime the walls. Especially if you want to replace the doors relatively soon (after a few years). This will save you a lot of trouble and expense when replacing your doors.
You can choose to paint your interior doors yourself. Most doors are available both painted and painted versions. If you want to get a nice result, keep in mind that it is best to remove the door leaves from the casing and disassemble the hardware. That way you can work much more closely and the end result will be a lot finer. However, should you choose lacquered doors you still want to paint your doors years later, that is also perfectly possible. A primer is then not even necessary; you can paint over them right away.
This depends on many different factors: the material used, the finish chosen, the type of frame, etc. Inform well with your placer to avoid surprises. Visit Peeters Interieur and get a price quote right away!
This varies by door type. Installing a sliding door and pivot door takes much more time than installing a block door, for example. When we schedule the placement, we will let you know approximately how long we need. That way you are well informed.
Is your question not listed or would you like some additional information before buying an interior door? Feel free to let us know or stop by. We are happy to help you make the right choice.
Come by our showroom in Meerhout and discover our endless options for interior doors. We will show you different designs and tell you all about the materials and finishing options. During this visit you determine your preferences, after which we put together an overall quotation. That way you'll know right away what your new doors will cost, including installation.
When you order your new pivot doors, we will immediately agree on a date for detailed on-site measurements and for the installation itself. This way, we are 100% sure that the interior doors will fit seamlessly into the doorways provided. These measurements are necessary for developing technical production drawings.
Before the installation date, we confirm our arrival. Our in-house craftsmen are responsible for a perfect installation and finish. We deliver everything neatly. When replacing existing doors, we take the old doors and trash with us, if desired, so you can enjoy your new doors right away.
Custom interior doors are Peeters Interieur’s specialty. With our self-developed Adooré range, we are among the absolute trendsetters for modern doors in Belgium. For all kinds of custom doors, you’ve come to the right place.
Thanks to our in-house paint shop and with our years of experience, we finish every door to your liking. Every interior door is manufactured in our own workshop after a personal measurement. Professional installation and finishing is done by our in-house craftsmen.
Feel free to visit our showroom in Meerhout to get some inspiration and tailored advice.
Binnendeuren Antwerpen |Binnendeuren Brussel | Binnendeuren Lier | Binnendeuren Geel | Binnendeuren Hasselt |Binnendeuren Pelt | Binnendeuren Tongeren| Binnendeuren Maaseik | kant-en-klare-binnendeuren| Binnendeuren kopen en laten plaatsen: tips en trick| Deuren Binnen Peeters Interieur | Deuren en kozijnen | Deuren kopen bij Peeters Interieur | Binnendeuren bij Peeters Interieur|
